home : virtual tour : contact info : mission statement : industries served : capabilities



Coating and Machining Capabilities:

     Turning:

     CNC Lathes

        Takisawa Model TC-2 MII – CNC Lathe –  13.75" Swing Over Bed, 10.18" Max. Turning Diameter, 11.82" Max. Turning Length, 14.56" Between Centers, 5,000 RPM, 8-Position Turret, 2.28" Hole Through Spindle, A2-6 spindle nose with 8” chuck and 5C collet closer, Fanuc 18 TA

        Takisawa TC 20  Max turning diameter: 13"  Max turning length: 12.0"  Max swing: 16.53"  Chuck: 8" Bar capacity: 2"  Nose: A2-6  Spindle speed: 4000 RPM  ATC: 8 station  X-travel: 6.25"  Z-travel: 14.55"  X,Y-traverse rate: 785 ipm

        Mazak Model M5 - CNC Lathe, Fanuc 6T Control, 8 Station Front Turret OD Tools,  6 Station Back Turret ID Tools, Air Chuck, Tail Stock 24” swing x 80”  centers

        Warner Swasey Model 5940 Universal 2-axis CNC Turning Center with hydraulic steady rest

      Manual Lathes

        Fortune, Engine Lathe, Model LD2080D – Gap Bed, 3” hollow spindle lathe, Spindlem (Sony) 2 axis digital readout, 3 and 4 jaw chucks, 2 steady rests, 4 way tool holder with intermediate bed support

        Longem Long Bed Engine Lathe 25 x 120, Model LG25120C with tool post grinder, Southwestern 2 axis digital readout, 4 way tool post, 18” 4 jaw chuck, steady rest, follower rest, 4” hollow spindle

        Lodge & Shipley Engine Lathe  20 x 96  with L-2 Nose., 2-1/2 Spindle Bore and taper attachment

        Victor Engine Lathe Model 2080 w/ dividing head – 20” swing x 7’ center, threading, taper foot control, 10” 3 jaw, square tool block, with a Trak 2 axis programmable digital readout, 12” 4 jaw chuck, 3 point steady rest, bull nose center and outfitted with a Dumore C6T34M22 tool post grinder

        Victor engine lathe, Model 1660, with tool post grinder, Southwestern Digital Readout

        Victor Engine Lathe Model 2080 taper, threading, with a Trak J1129 2 axis programmable digital readout, coolant, 3 jaw chuck, Cincinnati Rotary Indexer with 12” swing on separate drive motor

        Longem 2080 Engine Lathe – 20” x 80” with tool post grinder, quick change tool holder, Southwestern 2 axis digital readout, foot control

        DoAll 13” x 48” Lathe

        South Bend model 1643-30-1035 Tool makers Lathe on Cabinet, 10 x 24 with taper, face plate , threading chuck adapter, quick change collet attachment, 15 collets, 8” – 3 jaw, 6” – 4 jaw, ” jacobs chuck

        Hardinge Precision HTC-CF Chucker w/ threading attachment & hand collet closer

      Milling:

      CNC Verticals

        Haas VF-4 Vertical Machining Center , ATC capacity - 32 tool carousel, 3.5" tool dia., Table size - 18 x 52" X-Axis = 50", Y-Axis = 20", Z-Axis = 25", Max. weight on table - 3,500 lbs., Spindle Speed = 10,000 RPM, Spindle motor - 20 HP, Rotary Table, Haas CNC Control, Chip auger, Programmable coolant

        Haas VF-3 Vertical Machining Center, 40” x 20” x 25” (x-y-z) – 20-toll carousel tool changer, 7500 rpm spindle motor – 20 HP, 1000 ipm rapids, rigid tapping

        Miyano TSV-25 CNC Drill and Tap 12 Tool Turret with 24"x15" T-Slotted Work Table X-Axis=19.68", Y-Axis=14.96", Z-Axis=9.84"  Spindle Speeds = 60-6000 RPM, Cutting Feed Speed = 1-200 IPM, Tool Holder Type BT30, Fanuc OM-B CNC Controls

      Manual Verticals

        Victor vertical milling machine (Bridgeport type) – 1974 VM 1 VSK S/N 737021,  9” x 48” table, pressure lube, power feed table, table stops, light head 1 TM

      CNC Horizontals

        Kitamura Mycenter – 4 axes CNC - Model H400C – dual pallets changer  – X axis 20”; Y axis 20”, Z axis 24” – 10,000 rpm spindle – 100 position automatic tool changer

        Haas CNC – Model EC-300 – twin ballet changer – X axis 20”; Y axis 18”; Z axis 14” – 8,000 rpm spindle

      Turning:

      CNC Swiss Type

        Tsugami NP-32 Mark III - 6-axis, twin 8 station turret with live tooling – indexable sub-spindle - through 1- diameter – with bar feeder

        Hardinge Conquest ST225-B with LNS Hydrobar Mini Sprint bar feeder – 6-axis, multiple tool slide with live tooling, indexable sub-spindle – full C axis main spindle, through 1” diameter

        Ganesh - Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar feeder - comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger.

      Drilling:

         Metro Drill Press – DP-16F – heavy duty pedestal, 16” x 24” , HP, 16 speed

         Hansson Radial Drill Press

      Welding and Burning:

         Air Products D.C. Arc Welder

         Heavy Duty Portable Cutting Torch in tank cart

       Saw Cutting:

         Do-All Model C916 – 9” x 16” Horizontal Band Saw

         MSC - 7” x 12” Horizontal/Vertical Portable Band Saw - 1HP,  Blade Speeds 95--235 FPM

         Carolina 10” x 15” Horizontal Band Saw

       Oven Curing:

         Grieve B1-500 Curing Oven, 60” FB x 60” x 94” inside 52” x 53-1/2” x 84”  24KW input, 500 degree max, 230/60/3/60, HP blower Job # 0491103

         (3) Electric Stoves

       Miscellaneous:

        Horizontal Surface Grinder – Kent Model KGS-250-AH 8 x 16 2 axes hydraulic

        Horizontal Hydraulic Press – pusher assembly with 3-1/2” dia x 48” air cylinder

        Environmentally Controlled Prepolymer Heat Boxes

        Stainless Steel mixing station and pouring stations with ventilated hoods

        Various Portable and Fixed Grinders and Sanders

        (2) 1 ton pickup trucks

        (2) Forklifts – 4,000# - 48” forks

        Optical Comparator, Granite Surface Plate and full range of calibrated measuring equipment

 


Web related issues: webmaster
©Copyright 2002 Specialty Roller and Machine