Coating Equipment Capabilities:

Ø Turning:

Ø CNC Lathes

· Haas ST-30 SSY CNC Lathe with Y Axis(2011): 16" x 23" max capacity, 31.75" swing, ± 2.00" Y-axis travel, 30 hp vector drive, 4800 rpm, A2-6 spindle, 10" chuck, 24-station hybrid turret, high-torque live tooling w/C axis

· Takisawa Model TC-2 MII – CNC Lathe – 13.75" Swing Over Bed, 10.18" Max. Turning Diameter, 11.82" Max. Turning Length, 14.56" Between Centers, 5,000 RPM, 8-Position Turret, 2.28" Hole Through Spindle, A2-6 spindle nose with 8” chuck and 5C collet closer, Fanuc 18 TA

· Takisawa TC 20 Max turning diameter: 13" Max turning length: 12.0" Max swing: 16.53" Chuck: 8" Bar capacity: 2" Nose: A2-6 Spindle speed: 4000 RPM ATC: 8 station X-travel: 6.25" Z-travel: 14.55" X,Y-traverse rate: 785 ipm

· Mazak Model M5 - CNC Lathe, Retro-fitted with Centroid Controller, 8 Station Front Turret OD Tools, 6 Station Back Turret ID Tools, Air Chuck, Tail Stock 24” swing x 80” centers

· Victor 1860 DCL Fanuc 20i-TB Control, 9.4” swing over cross slide – 18.1” swing over bed, x 60”, 2.05” spindle bore, D1-6 spindle nose

· (3) - Prolight 3000 Lathes – 1-1/16” dia, x Axis = 4”; Z Axis = 10”; Swing = 6”

Ø CNC Swiss Type

· Ganesh – (2017) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder - comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger.

· Ganesh – (2016) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder - comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger.

· Ganesh – (2008) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder - comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger.

· Hardinge Conquest ST225-B with LNS Hydrobar Mini Sprint bar feeder – 6-axis, multiple tool slide with live tooling, indexable sub-spindle – full C axis main spindle, ¼ through 1” diameter

Ø MANUAL LATHES

· Fortune, Engine Lathe, Model LD2080D – Gap Bed, 3” hollow spindle lathe, Spindlem (Sony) 2 axis digital readout, 3 and 4 jaw chucks, 2 steady rests, 4 way tool holder with intermediate bed support

· Longem Long Bed Engine Lathe 25 x 120, Model LG25120C with tool post grinder, Southwestern 2 axis digital readout, 4 way tool post, 18” 4 jaw chuck, steady rest, follower rest, 4” hollow spindle

· Lodge & Shipley Engine Lathe 20 x 96 with L-2 Nose., 2-1/2 Spindle Bore and taper attachment

· Victor Engine Lathe Model 2080 w/ dividing head – 20” swing x 7’ center, threading, taper foot control, 10” 3 jaw, square tool block, with a Trak 2 axis programmable digital readout, 12” 4 jaw chuck, 3 point steady rest, bull nose center and outfitted with a Dumore C6T34M22 tool post grinder

· Victor Engine Lathe Model 2080 taper, threading, with a Trak J1129 2 axis programmable digital readout, coolant, 3 jaw chuck, Cincinnati Rotary Indexer with 12” swing on separate drive motor

· Longem 2080 Engine Lathe – 20” x 80” with tool post grinder, quick change tool holder, Southwestern 2 axis digital readout, foot control

· DoAll 13” x 48” Lathe

· Hardinge Precision HTC-CF Chucker w/ threading attachment & hand collet closer

· Monarch 10” EE 12.5” swing 20”between centers 8” 3 jaw chuck, quick change tool post holder

· American Pacemaker 16” 4 jaw chuck, 60” between centers threading and taper attachment

· American Pacemaker 18” 4 jaw chuck, 96” between centers threading and taper attachment

Ø Milling:

Ø CNC Verticals

· Campro CNV-1300 Vertical Machining Center, ATC capacity: 24 tool carousel, 3.1" tool dia., Table size: 23.6 x 55.12" X-Axis = 51.1", Y-Axis = 23.6", Z-Axis = 24", Max. weight on table: 900 lbs., Spindle Speed: 12,000 RPM, Spindle motor: 25 HP, Rigid Tapping, 4^th Axis Capable, Fanuc CNC Control, Chip auger

· RPM, Spindle motor - 20 HP, Rotary Table, Haas CNC Control, Chip auger, Programmable coolant

· Haas VF-3 Vertical Machining Center, 40” x 20” x 25” (x-y-z) – 20-tool carousel tool changer, 7500 rpm spindle motor – 20 HP, 1000 ipm rapids, rigid tapping

· Haas VF-3 Vertical Machining Center (2010), 40” x 20” x 25” (x-y-z) – 20-tool carousel tool changer, 7500 rpm spindle motor – 20 HP, 7500 rpm, 1400 ipm rapids, rigid tapping

· Haas VF-2SS - Super-Speed Vertical Machining Center; 30" x 16" x 20", 40 taper, 30 hp vector drive, 12,000 rpm, high-speed 24+1 side-mount tool changer, 1400 ipm rapids, rigid tapping

Ø Manual Verticals

· Victor vertical milling machine (Bridgeport type) – 1974 VM 1 ½ VSK S/N 737021, 9” x 48” table, pressure lube, power feed table, table stops, light head 1 ½ TM

Ø CNC Horizontals

· Kitamura Mycenter – 4 axes CNC - Model H400C – dual pallets changer – X axis 20”; Y axis 20”, Z axis 24” – 10,000 rpm spindle – 100 position automatic tool changer

· Haas CNC – Model EC-300 – twin ballet changer – X axis 20”; Y axis 18”; Z axis 14” – 8,000 rpm spindle

Ø Drilling:

· Metro Drill Press – DP-16F – heavy duty pedestal, 16” x 24” , ¾ HP, 16 speed

· Hansson Radial Drill Press

Ø Welding and Burning:

· Air Products D.C. Arc Welder, Mig and Tig welders

· Heavy Duty Portable Cutting Torch in tank cart

Ø Saw Cutting:

· Do-All Model C916A – Automatic 9” x 16” Horizontal Band Saw

· MSC - 7” x 12” Horizontal/Vertical Portable Band Saw - 1HP, Blade Speeds 95--235 FPM

· Knuth ABS280B Fully Automatic Horizontal Band Saw – 10 x 12 bundle size – 1.5 HP – ¾ to 4”/Min

Ø Oven Curing:

· Grieve B1-500 Curing Oven, 60” FB x 60” x 94” inside 52” x 53-1/2” x 84” 24KW input, 500 degree max, 230/60/3/60, ½ HP blower Job # 0491103

· (3) Electric Stoves

Ø Miscellaneous:

· Horizontal Surface Grinder – Kent Model KGS-250-AH 8 x 16 2 axes hydraulic

· Horizontal Hydraulic Press – pusher assembly with 3-1/2” dia x 48” air cylinder

· Environmentally Controlled Prepolymer Heat Boxes

· Stainless Steel mixing station and pouring stations with ventilated hoods

· Various Portable and Fixed Grinders and Sanders

· 1 ton pickup trucks

· (2) Forklifts – 4,000# - 48” forks

· Helmel CMM, Optical Comparator, Granite Surface Plate and full range of calibrated measuring equipment