HOME ABOUT PRODUCTION MACHINING SERVICES 

URETHANE/RUBBER COATING SVC

GALLERY QUALITY CONTACT US

Machining Capabilities:

Ψ Turning:

Ψ  CNC Lathes

·         Haas ST-30 SSY CNC Lathe with Y Axis(2011): 16" x 23" max capacity, 31.75" swing, ± 2.00" Y-axis travel,  30 hp vector drive, 4800 rpm, A2-6 spindle, 10" chuck, 24-station hybrid turret, high-torque live tooling w/C axis

·         Takisawa Model TC-2 MII – CNC Lathe –  13.75" Swing Over Bed, 10.18" Max. Turning Diameter, 11.82" Max. Turning Length, 14.56" Between Centers, 5,000 RPM, 8-Position Turret, 2.28" Hole Through Spindle, A2-6 spindle nose with 8” chuck and 5C collet closer, Fanuc 18 TA

·         Takisawa TC 20  Max turning diameter: 13"  Max turning length: 12.0"  Max swing: 16.53"  Chuck: 8" Bar capacity: 2"  Nose: A2-6  Spindle speed: 4000 RPM  ATC: 8 station  X-travel: 6.25"  Z-travel: 14.55"  X,Y-traverse rate: 785 ipm

·         Mazak Model M5 - CNC Lathe, Retro-fitted with Centroid Controller, 8 Station Front Turret OD Tools,  6 Station Back Turret ID Tools, Air Chuck, Tail Stock 24” swing x 80”  centers

·         Victor 1860 DCL  Fanuc 20i-TB Control, 9.4” swing over cross slide – 18.1” swing over bed, x 60”, 2.05” spindle bore, D1-6 spindle nose

·         (3) - Prolight 3000 Lathes – 1-1/16” dia, x Axis = 4”; Z Axis = 10”; Swing = 6”

Ψ  Manual Lathes

·         Fortune, Engine Lathe, Model LD2080D – Gap Bed, 3” hollow spindle lathe, Spindlem (Sony) 2 axis digital readout, 3 and 4 jaw chucks, 2 steady rests, 4 way tool holder with intermediate bed support

·         Longem Long Bed Engine Lathe 25 x 120, Model LG25120C with tool post grinder, Southwestern 2 axis digital readout, 4 way tool post, 18” 4 jaw chuck, steady rest, follower rest, 4” hollow spindle

·         Lodge & Shipley Engine Lathe  20 x 96  with L-2 Nose., 2-1/2 Spindle Bore and taper attachment

·         Victor Engine Lathe Model 2080 w/ dividing head – 20” swing x 7’ center, threading, taper foot control, 10” 3 jaw, square tool block, with a Trak 2 axis programmable digital readout, 12” 4 jaw chuck, 3 point steady rest, bull nose center and outfitted with a Dumore C6T34M22 tool post grinder

·         Victor Engine Lathe Model 2080 taper, threading, with a Trak J1129 2 axis programmable digital readout, coolant, 3 jaw chuck, Cincinnati Rotary Indexer with 12” swing on separate drive motor

·         Longem 2080 Engine Lathe – 20” x 80” with tool post grinder, quick change tool holder, Southwestern 2 axis digital readout, foot control

·         DoAll 13” x 48” Lathe

·         Hardinge Precision HTC-CF Chucker w/ threading attachment & hand collet closer

·         Monarch 10” EE  12.5” swing 20”between centers 8” 3 jaw chuck, quick change tool post holder

·         American Pacemaker 16” 4 jaw chuck, 60” between centers threading and taper attachment

·         American Pacemaker 18” 4 jaw chuck, 96” between centers threading and taper attachment

Ψ  Milling:

Ψ  CNC Verticals

·         Haas VF-4 Vertical Machining Center , ATC capacity - 32 tool carousel, 3.5" tool dia., Table size - 18 x 52" X-Axis = 50", Y-Axis = 20", Z-Axis = 25", Max. weight on table - 3,500 lbs., Spindle Speed = 10,000 RPM, Spindle motor - 20 HP, Rotary Table, Haas CNC Control, Chip auger, Programmable coolant

·         Haas VF-3 Vertical Machining Center, 40” x 20” x 25” (x-y-z) – 20-tool carousel tool changer, 7500 rpm spindle motor – 20 HP, 1000 ipm rapids, rigid tapping

·         Haas VF-3 Vertical Machining Center (2010), 40” x 20” x 25” (x-y-z) – 20-tool carousel tool changer, 7500 rpm spindle motor – 20 HP,  7500 rpm, 1400 ipm rapids, rigid tapping

·         Haas VF-2SS - Super-Speed Vertical Machining Center; 30" x 16" x 20", 40 taper, 30 hp  vector drive, 12,000 rpm, high-speed 24+1 side-mount tool changer, 1400 ipm  rapids, rigid tapping

Ψ  Manual Verticals

·         Victor vertical milling machine (Bridgeport type) – 1974 VM 1 ½ VSK S/N 737021,  9” x 48” table, pressure lube, power feed table, table stops, light head 1 ½ TM

Ψ  CNC Horizontals

·         Kitamura Mycenter – 4 axes CNC - Model H400C – dual pallets changer  – X axis 20”; Y axis 20”, Z axis 24” – 10,000 rpm spindle – 100 position automatic tool changer

·         Haas CNC – Model EC-300 – twin ballet changer – X axis 20”; Y axis 18”; Z axis 14” – 8,000 rpm spindle

Ψ  Turning:

Ψ  CNC Swiss Type

·         Ganesh – (2017) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder -  comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger. 

·         Ganesh – (2016) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder -  comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger. 

·         Ganesh – (2008) Cyclone-32 CS 7 axis Dual Spindle CNC Turning Centers with Patriot bar Feeder -  comes with 27 Tools, Twin Spindles (Main and subspindle work simultaneously), 32mm capacity, 11 Live Tools, 10 HP Spindle Motor, Parts Catcher and Chip Auger.  

·         Hardinge Conquest ST225-B with LNS Hydrobar Mini Sprint bar feeder – 6-axis, multiple tool slide with live tooling, indexable sub-spindle – full C axis main spindle, Ό through 1” diameter

Ψ  Drilling:

·         Metro Drill Press – DP-16F – heavy duty pedestal, 16” x 24” , Ύ HP, 16 speed

·         Hansson Radial Drill Press

Ψ  Welding and Burning:

·         Air Products D.C. Arc Welder, Mig and Tig welders

·         Heavy Duty Portable Cutting Torch in tank cart

Ψ  Saw Cutting:

·         Do-All Model C916A – Automatic 9” x 16” Horizontal Band Saw

·         MSC - 7” x 12” Horizontal/Vertical Portable Band Saw - 1HP,  Blade Speeds 95--235 FPM

·         Knuth ABS280B Fully Automatic Horizontal Band Saw – 10 x 12 bundle size – 1.5 HP – Ύ to 4”/Min

Ψ  Oven Curing:

·         Grieve B1-500 Curing Oven, 60” FB x 60” x 94” inside 52” x 53-1/2” x 84”  24KW input, 500 degree max, 230/60/3/60, ½ HP blower Job # 0491103

·         (3) Electric Stoves

Ψ  Miscellaneous:

·         Horizontal Surface Grinder – Kent Model KGS-250-AH 8 x 16 2 axes hydraulic

·         Horizontal Hydraulic Press – pusher assembly with 3-1/2” dia x 48” air cylinder

·         Environmentally Controlled Prepolymer Heat Boxes

·         Stainless Steel mixing station and pouring stations with ventilated hoods

·         Various Portable and Fixed Grinders and Sanders

·         1 ton pickup trucks

·         (2) Forklifts – 4,000# - 48” forks

·         Helmel CMM, Optical Comparator, Granite Surface Plate and full range of calibrated measuring equipment


Web related issues: webmaster
©Copyright 2002 Specialty Roller and Machine